CAP wall hanging 1/240

Stylish wall storage for your favorite caps

Simply fold the cap in half and insert the top button. By firmly fastening it to the wall with a stapler, scratches will not be noticeable when you remove it.

Manufacturer: Kokubo Industries

[Ingredients] Material: Base/Polypropylene, Cover/Polypropylene

●Depending on the shape of the top button on the cap, it may not fit into this product. ●In case of an emergency, never hang valuables or fragile items on the cover. ●The staples will make small holes in the installation surface. Use in a location where they will not cause any problems. ●Be careful of the staples after removing them. ●Do not use for any purpose other than their intended use. ●When disposing of the cover, follow the procedures prescribed by your local government.
[Usage, Use, etc.] ●Installation: Firmly drive one staple into each recess (12 locations) all the way to the base. Pass the hook part through the hole in the cover, and firmly insert the protrusions of the cover into the four corner holes on the base. ●Removal: Insert a spatula or similar tool into the notches on the top and bottom of the cover to remove the cover. Use the staple remover on the back of the stapler to remove several staples, then lift the base from the edge and slowly remove it from the wall. *Partially opening or compact staples cannot be used. *Use stainless steel staples. Iron staples will rust and stain the wall. *If any staples are loose, remove them and reinsert them. ●Suitable Wall Surfaces: Plasterboard, Plywood, etc. *Do not use on hard plasterboard, hard plywood, or plywood less than 5.5mm thick. ●Unsuitable Wall Surfaces: Tile, Concrete, etc.
[Usage Precautions] ●Depending on the shape of the top button on the cap, it may not fit into the product. ●In case of an emergency, do not hold valuables or fragile items. ●The staples will make small holes in the installation surface. Use in a location where there will be no interference. ●Be careful of the staples after removal. ●Do not use for any purpose other than its intended use. ●When disposing of, please follow the procedures prescribed by your local government.
[Storage Instructions] Do not use in direct sunlight, high temperatures, or high humidity.

Made in: Japan